For Tvs With Built-In Dvb-T Tuner; Connection Example - Schwaiger ZA 8970 Anschlusshinweise

FOR TVS WITH BUILT-IN DVB-T TUNER

CONNECTION EXAMPLE

(LEFT SIDE OF PICTURE)
Powered via built –in DVB-T tuner
» Plug the antenna cable into the antenna jack of the
amplifier. Then connect the cable of the amplifier
to the antenna input of your TV.
» The 5 V power supply must be switched On in the
appropriate menu of the TV set. The power will be
transmitted to the antenna via the coaxial cable.
CONNECTION EXAMPLE
(RIGHT SIDE OF PICTURE)
Powered via AC / DC adapter
» Plug the antenna cable into the antenna jack of the
amplifier. Then connect the cable of the amplifier
to the antenna input of your TV.
» Connect the AC-adapter with the 5 V
the amplifier and plug the 230 V
a wall outlet.
» Make sure that the 5 V power supply is swiched Off
in the menu of your TV set.
jack of
adapter into
7