Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operating instructions
Wireless Switch Set for Outdoor Use
Item no. 1555327
Intended Use
The product consists of a radio controlled main socket and a radio controlled handheld trans-
mitter. By using the handheld transmitter, a consumer load connected to the remote controlled
switch socket can be turned on or off wirelessly.
The supplied radio-controlled switch socket is suited for outdoor use. Please make sure that
the location of the product is also suitable when it is in operation, otherwise there is the danger
of a life-threatening electric shock (please observe the instructions under "Start up"!). The radio
controlled switch socket must be connected to a safety power socket outlet. For outdoor use,
the power outlet which is utilised must at least comply with protection class IP44.
See chapter "Technical Data" for information on connection and the maximum permissible
power consumption of the electrical loads connected to the radio controlled switch socket.
The radio controlled handheld transmitter may only be operated using a 12 V special battery
of type "23A" (included). The radio controlled handheld transmitter must not get damp or wet
as this would damage it.
For safety and approval reasons, you may not convert and/or alter the product in any way.
If you use the product for other purposes than those described above, the product may be
damaged. Moreover, improper use involves risks such as short-circuits, fire, electric shocks,
etc. Please read the operating instructions carefully and do not discard them. If you pass the
product on to a third party, please hand over these operating instructions as well.
This product complies with the applicable national and European Regulations. All names of
companies and products are the trademarks of the respective owners. All rights reserved.
Package Contents
• Radio controlled switch socket
• Radio controlled handheld transmitter
• 12 V special battery for handheld radio transmitter
• Operating Instructions
Up-to-date operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code. Follow the instructions on the website.
Explanation of symbols
The lightning symbol inside of a triangle is used when there is a potential risk of
personal injury, such as electric shock.
An exclamation mark in a triangle indicates important instructions in this operating
manual which must be adhered to.
The arrow symbol indicates specific tips and advice on operation.
Observe the operating instructions!
Safety Instructions
Please read the operating instructions carefully and pay particular attention
to the safety instructions. We do not assume liability for any injuries/mate-
rial damages resulting from failure to observe the safety instructions and the
information in these operating instructions regarding the proper use of the
product. Furthermore, in such cases, the warranty/guarantee will be null and
void.
a) General Information
• The unauthorised conversion and/or modification of the product is not permissible
for safety and approval reasons.
• Do not use this product in hospitals or medical institutions. Although the product
emits only relatively weak radio signals, they could cause life-support systems to
malfunction. The same may also apply to other areas.
• The product is not a toy. Keep out of the reach of children and pets.
• Do not leave packaging material unattended. It may become a dangerous play-
thing for children.
• Protect the product from exposure to extreme temperatures, direct sunlight, strong
vibrations and combustible gases, vapours and solvents.
• Never expose the product to mechanical stress.
• Please handle the product carefully. The product can be damaged if crushed,
struck or dropped, even from a low height.
• Also observe the safety and operating instructions of any other devices that are
connected to this product.
• If safe operation is no longer possible, take the device out of service and secure
it against unintended use. Safe operation is no longer possible, if the product:
- has visible damage,
- no longer functions properly,
- has been stored under adverse ambient conditions for an extended period of
time or
- has been exposed to considerable strain during transport.
• If you have doubts about how the product should be operated or how to safely
connect it, consult a qualified technician.
• Maintenance, adjustment and repair work should only be carried out by an expert
or a specialised workshop.
• If you have any questions that are not answered in these operating instructions,
please contact our technical customer service or other professionals.
b) Connection and Operation
• The radio controlled switch socket is designed in accordance with protection
class I. Only a standard mains socket with protective earth for the public supply
grid may be used as the power source for the radio controlled switch socket.
• The mains socket into which the radio controlled switch socket is plugged in must
be easily accessible.
• The radio-controlled switch socket is equipped with a childproof lock. Only when
the pins of the power plug are placed in both openings of the front socket at the
same time will the childproof ock mechanism release the opening.
Nevertheless, take special caution when children are around. Children cannot rec-
ognise the danger arising from the incorrect use of electrical devices. There is a
risk of a life-threatening electric shock!
• The product is protected according to IP44; it can be used outdoors. It is essen-
tial, however, to ensure the correct operating position (see chapter "Connection
/ Start-up").
• Never block the cover over the outlet. Allow the cover to close automatically and
completely by means of the integrated springs when not in use.
• If devices, connection or extension cables are to be kept outdoors (lamps, water
pumps, etc.), they must be suitable for outdoor use.
• Never use the radio controlled switch socket in or under water, there is a danger
of a fatal electric shock!
• Although the product is suitable for outdoor use, you must never aim the water jet
of a garden irrigation system or a pressure washer at the radio controlled switch
socket.
• Never touch, operate, plug in or unplug the radio controlled switch socket when
your hands are damp or wet. There is a risk of a life-threatening electric shock!
The same applies for the load that is plugged into the socket of the product, the
plug must not be damp or wet.
• Do not open the cover of the radio controlled switch socket when it is raining/
snowing and do not connect or disconnect any device. There is a risk of fatal
electric shock!
• If any liquid has still managed to enter the device, immediately turn off the power
supply to the main socket where the radio controlled switch socket is connected
(turn off the fuse/circuit breaker/residual current operated circuit breaker of the
associated circuits). Only then can you unplug the radio-controlled switch socket
from the mains socket and contact a specialist. Do not use the product any longer.
• Use the product only in a temperate climate, never in a tropical climate.
• Do not operate the device in environments where there are high levels of dust,
flammable gases, vapours or solvents. There is a danger of fire and explosion!
• Do not connect the radio controlled switch socket to the power supply immediately
after it has been transferred from a cold room into a warm one (e.g., after trans-
port). The condensation that forms might damage the device. Moreover, there is
danger of electric shock! Allow the product to reach room temperature. Wait until
the condensation has evaporated. This might take several hours. Only then can
the product be connected and put into operation.
• Never use the product in a vehicle.
• Never pull out the power plug from the front socket of the radio controlled switch
socket by pulling on its cable. Always pull the plug out of the front socket by grip-
ping the area provided for this purpose on its sides.
• Do not overload the radio controlled switch socket. Observe the power rating in
the chapter "Technical Data".
• Always pull the radio controlled switch socket out of the mains socket before
cleaning it or when the device will not be in use for a long time.
• Do not connect in series! This can lead to an overload of the radio-controlled
switch socket! There is a risk of fire!
• Do not operate while covered! At higher connected loads, the radio-controlled
switch socket becomes warm, which can lead to overheating and potentially a
fire if covered!
• Voltage-free only, if the plug is unplugged!
Werbung
Inhaltsverzeichnis
