Braun 5697 Bedienungsanleitung Seite 13

Subject to change without notice.
For electric specifications, see printing on the special cord set.
Guarantee
We grant a 2 year guarantee on the product commencing on the date of purchase.
Within the guarantee period we will eliminate any defects in the appliance resulting from
faults in materials or workmanship, free of charge either by repairing or replacing the
complete appliance at our discretion.
This guarantee extends to every country where this appliance is supplied by Braun or its
appointed distributor.
This guarantee does not cover: damage due to improper use, normal wear and tear
(e.g. shaver foil or cutter block) as well as defects that have a negligible effect on the
value or operation of the appliance. The guarantee becomes void if repairs are
undertaken by unauthorised persons and if original Braun parts are not used.
To obtain service within the guarantee period, hand in or send the complete appliance
with your sales receipt to an authorised Braun Customer Service Centre (address
information available online at www.service.braun.com).
For UK only:
This guarantee in no way affects your rights under statutory law.
Trouble-Shooting
Problem:
Unpleasant
smell from the
shaver head.
Battery
performance
dropped
significantly.
Shaving
performance
dropped
significantly.
14
Possible reason:
Shaver head is cleaned with
water.
1. Foil and cutter are worn
which requires more power
for each shave.
2. Shaver head is regularly
cleaned with water but not
lubricated.
1. Foil and cutter are worn.
2. Personal setting of shaving
performance has been
changed.
3. Shaving system is
clogged.
Remedy:
When cleaning the shaver head with
water only use hot water and from
time to time some liquid soap (without
abrasive substances). Remove Foil &
Cutter cassette to let it dry.
1. Renew Foil & Cutter cassette.
2. If the shaver is regularly cleaned
with water, apply a drop of light
machine oil on top of the foil once a
week for lubrication.
1. Renew Foil & Cutter cassette.
2. For a thorough and fast shave we
recommend the green (intensive)
setting.
3. Soak the Foil & Cutter cassette into
hot water with a drop of dish liquid.
Afterwards rinse it properly and tap
it out. Once dry apply a drop of
light machine oil on the foil.