Beko WTV 7812 BS Bedienungsanleitung Seite 16

Rinse hold
If you are not going to unload your clothes
immediately after the programme completes,
you can use rinse hold function to keep your
laundry in the final rinsing water in order to
prevent them from getting wrinkled when
there is no water in the machine. Press Start /
Pause button after this process if you want to
drain the water without spinning your laundry.
Programme will resume and complete after
draining the water.
If you want to spin the laundry held in water,
adjust the Spin Speed and press Start / Pause
button. The programme will resume. Water is
drained, laundry is spun and the programme is
completed.
C
INFORMATION
• If the programme has not reached
the spinning step, you can change
the speed without switching the
machine to Pause mode.
4.3.10 Auxiliary function selection
Select the desired auxiliary functions before
starting the programme. Furthermore, you may
also select or cancel auxiliary functions that
are suitable to the running programme without
pressing the Start / Pause button when the
machine is operating. For this, the machine
must be in a step before the auxiliary function
you are going to select or cancel. If the auxiliary
function cannot be selected or canceled, light
of the relevant auxiliary function will blink 3
times to warn the user.
C
INFORMATION
• If a second auxiliary function conflicting
with the first one is selected before starting
the machine, the function selected first
will be canceled and the second auxiliary
function selection will remain active.
• An auxiliary function that is not compatible
with the programme cannot be selected.
(See, "Programme and consumption table")
• Auxiliary Function buttons may vary
according to the model of the machine.
16 / EN
4.3.10.1 Auxiliary functions
• Voorwas (Prewash)
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save
energy, water, detergent and time.
C
INFORMATION
• Prewash without detergent is
recommended for tulle and curtains.
• Fast+
When this function is selected, the durations of
the relevant programmes get shorter by 50%.
Thanks to the optimised washing steps,
high mechanic activity and optimum water
consumption, high washing performance is
achieved in spite of the reduced duration.
C
INFORMATION
• When you select this function, load your
machine with half of the maximum laundry
specified in the programme table.
• Extra Spoelen (Extra Rinse)
This function enables the product to make
another rinsing in addition to the one already
made after the main wash. Thus, the risk for
sensitive skins (babies, allergic skins, etc.) to
be effected by the minimal detergent remnants
on the laundry can be reduced.
4.3.10.2 Functions/Programmes
Selected by Pressing the Function
Buttons for 3 Seconds
• Drum Cleaning
Press and hold the auxiliary function button 1
for 3 seconds to select the programme. Use
regularly (once in every 1-2 months) to clean
the drum and provide the required hygiene.
Steam is applied before the programme to
soften the residues in the drum. Operate the
programme while the machine is completely
empty. To obtain better results, put powder
lime-scale remover for washing machines into
the detergent compartment no. "2". When the
programme is over, leave the loading door ajar
so that the inside of the machine gets dry.
Washing Machine / User's Manual