English; How To Operate The Appliance - Braun Silk epil 7951 Spa Bedienungsanleitung

English

Our products are engineered to meet the highest
standards of quality, functionality and design.
We hope you thoroughly enjoy using your Braun
Silk·épil 7 SkinSpa.
Please read the use instructions carefully before
using the appliance and keep them for future
reference.
Braun Silk·épil 7 SkinSpa offers a complete
system for beautiful skin:
• The epilation head (2) removes the shortest
hair (0.5 mm) at the root.
• The exfoliation brush (10a) visibly refines your
skin by sweeping away dry skin cells via gentle
micro-vibrations.
• The shaver head (11) is designed for a fast and
close shave of underarms and bikini line.
The appliance is suitable for dry and wet usage
except for the shaver head attachment which
should only be used on dry skin.
Important
• For hygienic reasons, do not share this appliance
with other persons.
• This appliance is provided with a special cord
set with an integrated Safety Extra Low Voltage
power supply. Do not exchange or manipulate
any part of it. Otherwise there is risk of electric
shock.
• This appliance is suitable for use in
bath or shower. For safety reasons, it
can only be operated cordlessly.
• Children as of 8 years and persons with reduced
physical, sensory or mental capabilities or lack
of experience or knowledge can use this ap-
pliance provided they have been given super-
vision and instructions on its safe use and
understand the hazards involved. Children must
not play with the appliance. Children must not
carry out cleaning and user maintenance unless
they are supervised.
10
• When switched on, the appliance must never
come in contact with the hair on your head,
eyelashes, textile ribbons, etc. to prevent any
danger of injury as well as to prevent blockage
or damage to the appliance.
Description
1 High-Frequency Massage System
2 Epilation head
3 Smart light
4 Switch with lock keys (4a)
5 Charging light
6 Release button
7 Special cord set
8 Sensitive area cap
9 Facial cap
10 Brush adapter
10a Exfoliation brush
10b Protective cover
11 Shaver head
a Trimmer cap
b Shaver foil
c Trimmer
d Release buttons
e Trim/shave selector
f Cutter block
g Shaver head base
12 Cleaning brush
Charging
• Before use, charge the appliance. For best
performance, we recommend that you always
use a fully charged appliance. Using the special
cord set, connect the appliance to an electrical
outlet with the motor switched off. Charging
time is approximately 1 hour.
• The charging light (5) flashes green (+) to show
that the appliance is being charged. When the
battery is fully charged, the green charging
light shines permanently. Once fully charged,
use the appliance without the cord.
• A red flashing charging light (–) shows that it is
time to recharge the appliance. Reconnect it to
an electrical outlet via the special cord set.
• A full charge provides up to 40 minutes of cord-
less operation time.
• Wet usage might reduce the operation time.
We recommend that you recharge the appliance
after each use.
• The best temperature range for charging, using
and storing the appliance is between 15 °C and
35 °C. In case the temperature is far beyond
this range, charging might take longer and the
cordless operation time might be reduced.
Overheating protection
As a safety feature to avoid the unlikely event of
the appliance overheating, it may happen that the
charging light (5) shines red for 8 seconds and
then the appliance turns off automatically. In this
case, turn the switch back to the position «0»
(off) and let the appliance cool down.

How to operate the appliance

Pressing the lock key (4a) turn the switch (4)
clockwise.
You can select speed «I» or «II».
The Smart light (3) shines as long as the appliance
is switched on.
This provides better visibility of fine hairs or skin.
To change an attachment, press the release
button (6). Detach the head in place and click-on
a new one.