About The Electronic Image Stabiliser (Eis) Built-In Your X-Sports; How To Use Your Bundled Mounting Accessories - Toshiba CAMILEO X-SPORTS Bedienungsanleitung

CAMILEO X-SPORTS
20 Min
60 Min
120 Min
Upside Down
When mounting your X-Sports Upside Down your files will be upright when
viewing or editing. This setting allows you not to flip your video or photos.
The supported video resolutions are as follows:
FULL HD 1920 x 1080 (30 / 24 fps NTSC) (25 / 24 fps PAL)
HD 1280 x 720: (60 fps NTSC / 50 fps PAL)
1200P 1600 x 1200: (30 fps NTSC, 25 fps PAL)
960P 1280 x 960: (60 / 48 fps NTSC) (50 / 48 fps PAL)
VGA 640 x 480: (30 fps NTSC)
About the Electronic Image Stabiliser (EIS)
built-in your X-Sports
The Electonic Image Stabiliser (EIS) built-in your X-Sports camcorder helps
to improve your video performance in environments when the camcorder is
subject to movement. Please be aware that in action usage scenarios where
the camcorder is subject to extreme movement, the EIS brings only limited
image stabilisation to your camcorder's video performance. If EIS is activated,
the view angle will be reduced by approximately 10%.

How to use your bundled Mounting Accessories

Important
Apply mounts to clean and smooth surfaces only. Surfaces must be free of dirt, oil and
contaminants to ensure adhesive mount attaches securely and to avoid the mount
detaching during use. Attach mount at room temperature 24 hours prior to use to ensure
optimum adhesion.
EN-24
Camera records 4 x 5 minutes file, then deletes the first
5 minutes file to continue recording a new video.
Camera records 4 x 15 minutes file, then deletes the
first 15 minutes file to continue recording a new video.
Camera records 8 x 15 minutes file, then deletes the
first 15 minutes file to continue recording a new video.
User's Manual