Video Mode; Photo Mode - Toshiba CAMILEO X-SPORTS Bedienungsanleitung

CAMILEO X-SPORTS

VIDEO MODE

In Video mode the status LED will be slowly blinking red. Once the user
presses the Record button on from either the camera or remote, the camera
will start recording and the LED will start blinking red continuously. Press the
Record button on the camera and it will stop recording and status LED will
resume blinking red slowly. Press the Stop button on the remote and camera
will stop recording and status LED will resume blinking red slowly.
Please note that besides the original recorded video file
(VID00001.mp4) a smaller sized video file (VID00001_thm.mp4) will be created
during video recording. This file will be used for faster video content transfer
with your WiFi APP from the camera to your tablet/smartphone device and
further to upload your videos and photos to social networks with your WiFi APP.*
*Please refer to further information about the WiFi APP to section Toshiba APP
"Toshiba WiFi Connect".

PHOTO MODE

In Photo mode, the status LED will be blinking blue slowly. Once the user
presses the Record button on either the camera or remote, the camera will
capture a single picture and LED will blink once upon the photo is taken.
PHOTO BURST MODE
In Photo Burst mode, status LED will be blinking blue slowly. Once the user
presses the Record button on either the camera or remote, the camera will
capture a pre-defined burst of photos within a pre-defined period (please refer
to Photo Burst Settings section) and the LED will blink once upon the burst of
photos is taken.
EN-15
User's Manual