VAPANION BOX MOD KIT Bedienungsanleitung Seite 82

VAPANION
SWITCHER
2. Setting the temperature: In the VT-Ni/VT-Ti/VT-SS/TCR modes, the temperature can be adjusted by
pressing the Plus and Minus buttons. You can choose between the ranges 100°C to 315°C and 200°F
to 600°F. When pressing the Plus or Minus button, the temperature is increased or decreased by
5°C or 10°F. Press and hold the respective button to set the desired temperature at a higher speed.
3. Automatic detection of new atomizer heads: To ensure that the temperature control will accurately
work when inserting a new head, "OLD LOAD: -, NEW LOAD: +" appears on the display. If the head
differs from the one that was previously used, select the Plus button and the resistance will be newly
selected. Select the Minus button to leave the preset resistance as is
4. Locking/Unlocking the resistance: In the VT-Ni, VT-Ti, VT-SS, and TCR modes, you can lock or unlock
the resistance by selecting "4) Lock / Unlock" in the sub-menu chosen by the mode key using the
minus or plus key. After pressing the mode button again, you can use the "plus" and "minus" buttons
to choose between "locked" and "unlocked". A lock ( ) will appear on the display. Replacing the
atomizer head does not reset the set resistance.
80
OPERATING & CHANGING THE VAPING MODES