VAPANION BOX MOD KIT Bedienungsanleitung Seite 71

USING THE DEVICE
Display
After switching on the device, the voltage, resistance value, battery level, temperature and power output
are displayed on the OLED display. If the device is not used for 10 seconds, the Real Time Clock will
display the time. If the device is not used for an additional 15 minutes, the time display will also go out.
You can reactivate the time display by pressing the Mode button once or by using the Minus or Plus
button. If you press any of these buttons one more time, the main menu will be displayed again. Press
the fire button to reactivate the display and return to the main display straight away.
Under "System Set" in the mode menu, you can change your settings for the display by pressing the
Mode button three times. The individual time settings from 3 seconds to 60 minutes are controlled and
regulated using the Plus and Minus buttons. These settings are confirmed and saved by pressing the
Mode button.
Exclusive Feature on the Switcher LE
If you select the 'Light' submenu using the Plus and Minus buttons under "System Set", you
have the option to modify the LED light on the casing.
VAPANION
SWITCHER
69