Electrical Safety - FLORABEST FLH 2800 A1 Betriebsanleitung

GB IE
ence of alcohol or medication. Always
take a break when you need one.
• Switch the shredder off and pull the plug
under the following circumstances:
- when you are not using the device,
- transporting it or leaving it unattended;
- before releasing a jammed blade.
- when you are checking the device,
cleaning it or removing blockages;
- when you are carrying out cleaning or
maintenance work or replacing acces-
sories;
- Before moving or lifting the shredder
- If foreign objects should enter the
shredder, if the shredder is making un-
familiar noises or vibrations (check the
shredder for damage before starting it
up again)
• Do not allow shredded material to ac-
cumulate near the ejection area. This may
otherwise hinder proper ejection and
force the material back up through the
feeder.
• Do not transport or tip the shredder with
the motor running.
• Keep hands, other body parts and
clothing out of the filling chamber and
ejection channel and away from other
moving parts.
• In the event of blockages in the ma-
chine intake or ejection, switch off the
motor and disconnect the machine
from the mains before removing lefto-
ver material in the intake opening or
ejection channel. Ensure that the motor
is free of rubbish and other accumula-
tions in order to safeguard the motor
from damage or possible fire. Remem-
ber that the cutting tool is also acti-
vated when the starting mechanism is
started on a motor operated machine.
8
CAUTION! The following states how
damage to the trimmer and possible
injury to people can be avoided:
• Clean the ventilation slits regularly; keep
to the maintenance instructions.
• Do not overload your device. Work
only within the indicated range of
performance. Do not employ any low
power machines for heavy work. Do
not use your device for purposes for
which it has not been designed.
• Only switch the shredder off once the fun-
nel feeder is completely empty since the
shredder may otherwise clog up and not
be able to start afterwards.
• Do not attempt to repair the shredder
yourself unless you are qualified to do
so. Any work not specified in this manual
may only be carried out by our service
centre.

Electrical safety

CAUTION! The following states how
to avoid accidents and injuries due to
electric shock:
• Use the tension relief provided for the fix-
ing of the extension cord.
• Damaged cables, coupling and plugs or
connecting leads not corresponding to
specifications, must not be employed. Re-
move the plug immediately from the plug
socket in case of damage to the mains
cable.
Do not touch the mains power supply
cable under any circumstances until you
have pulled the plug out of the mains
socket.
• If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent of