Setup - Silvercrest STS 12 B2 Bedienungsanleitung

+2H: the LEDs switch on automatically at dusk and
then light up for 2 hours.
+4H: the LEDs switch on automatically at dusk and
then light up for 4 hours.
+6H: the LEDs switch on automatically at dusk and
then light up for 6 hours.
ON I: the LEDs light up in different colours and combina-
tions.

Setup

Select a suitable location for setting up the appliance. This
location must fulfil the following criteria:
― The TV Simulator may not be directly visible from
outdoors.
― The flickering generated by the TV simulator must be
visible on the walls and/or ceiling from outdoors.
― A power socket must be easily accessible.
― The TV Simulator must be installed such that it can
be influenced by the twilight. This means that it must
be able to detect light from outside!
― The TV Simulator may not be located near a window
which could be well lit from outdoors, such as on a
busy street or next to street lights.
― There should be no additional time-controlled light
source in the room, e.g. a night light.
♦ Place the appliance on a firm and flat surface so that
it is stable and secure. To help prevent it from tipping
over, you can secure the stand with the adhesive strips.
CAUTION - PROPERTY DAMAGE
► Do not use the adhesive strips to hang the appliance
on a wall! The appliance may fall down and be
irreparably damaged!
STS 12 B2
│
25 ■
GB