Installation and Operation
Troubleshooting
The unit does not sound when the batteries are in-
stalled.
Ensure that the batteries are full and connected correctly
according to the diagram in the battery compartment.
The Alarm does not arm.
Ensure that the back plate of the alarm unit is secure to hold
the batteries in place and that the red light (9) comes on
when the "ARM" or "DISARM" buttons are pressed.
The red Light (4) on the Alarm unit is on continuously.
This is the 'Battery Low Indicator'. The batteries need
replacing.
The red Light (9) on the Remote Control does not light
up when the Buttons are pressed.
Replace the batteries of the remote control as per the
instructions listed above.
10