Introduction; Safety Instructions; Description Of Symbols; Instructions - Wisd MSH-20D Bedienungsanleitung

1 Introduction

Thank you for purchasing our
a Wisd product.
Before use, please read this manual and use it properly.
To cover the user's health and avoid the product's destruction you have to follow the safety
instructions of the second chapter.
Please keep this operating manual in a save place for future reference and hand it out if you
consign the device to a third person.
Witeg reserves to modify the capsule or make amendments for the improvement of quality and
efficiency without prior notice.

2 Safety Instructions

2.1 Description of Symbols

WARNING
Information for avoiding injuries or fatal accidents.
ATTENTION
Safety instruction to avoid a damage of the product.
ATTENTION
Information about technical parameters.
Environment
Information about the operating environment.
WARNING of explosions
Safety instruction to avoid explosions.
ATTENTION to high temperatures
Instructions to avoid injuries caused by high temperatures.

2.2 Instructions

For a safety and faultless using of the device it is indispensable that you read the following
instructions purposely and follow them by the use.
 Connect the device only to the suitable power supply. Please have a look to the
identification plate.
 Use the device only in electric circuits with ground fault circuit interrupter (RCD).
 Check the power supply cord before you stick it into the electrical outlet.
 Do not use power bars to extend the power supply cord.
MSH-D Hotplate Magnetic Stirrer. You did a good choice buying