walser mantona DSLM Travel Evolution 2252-RA Anleitung

mantona DSLM travel evolution
We are pleased that you have decided to buy a mantona product from WALSER.
With the photo tripods of the mantona DSLM Travel Evolution series, you get a
light and compact tripod which is fully equipped. These tripods offer you uncom-
promising quality and highest application comfort.
The tool-free monopod function, the separate short center column, the comfortable
carrying bag in combination with the high-quality ball head etc. makes the DSLM
Travel Evolution tripods an exceptionally variable and versatile companion at your
photo projects.
The flip-lock locking lever system used for this tripod guarantees together with
the one segment center column a very fast and secure installation of this photo
camera.
Wir freuen uns, dass Sie sich für ein We hope you enjoy using our product.
mantona Produkt aus dem Hause
Your team from WALSER
WALSER entschieden haben.
C) Leg angle adjustment:
WALSER bietet seinen Kunden
The tripod legs can be adjusted to three different angles: (23°, 55°, 85°). In addition,
mit den Marken walimex pro und
the working height and the level of steadiness can be modified. To set the desi-
mantona preiswerte, ausgewählte
red angle of the tripod legs, move the tripod legs (8) slightly inwards and pull the
und exklusive Produkte für kreative
locking clip (7) downwards. Hold the clip and adjust until you reach the desired
Foto- und Videografie direkt vom
angle. Let go of the clip and block the tripod legs again.
Hersteller. Dabei profitieren sowohl
ambitionierte Anfänger wie auch Pro- ATTENTION! If you don't follow the instructions, you may get pinched.
fis von unserem Produkt Know-how HINT: To loosen the clips, simply pull the tripod legs slightly inwards.
und einem ausgezeichneten Service.
D) Folding up the tripod:
Ob Fragen zu technischen Details
To fold up the tripod, pull the angle adjustment clips (7) slightly downwards and
oder zu Einsatzgebieten unserer
fold the tripod legs (8) upwards by 180°. This is how you can pack up the tripod as
Produkte – mit einer individuellen
small as possible for normal transportation.
Fachberatung durch ausgebildete
Fotografen unterstützen wir unsere ATTENTION! If you don't follow the instructions, you may get pinched.
Kunden auch nach dem Kauf in allen E) Height adjustment of the tripod legs and center column:
Aspekten rund um unser Portfolio.
Set the desired leg angle. Loosen the flip lock leg locks (11). Extend the tripod legs
(8) to the desired length. Close the leg locks (11) again. The maximum working
Teilen Sie unsere Begeisterung für
height can also be changed by pulling out the center column (4). To do this, loose
professionelle Foto- und Videogra-
the center column lock (5). Set the desired height. Close the locks again by
fie und lassen Sie sich von unseren
screwing them tightly anticlockwise.
Produkten inspirieren!
F) Reverse center column function:
Ihr Team von WALSER
For using close to the ground (e.g. for macro shots), the center column can be
used upside-down. Loosen the center column lock (5) and remove the weight hook
(12). Remove the center column (4) and insert it back into the tripod from below.
Close the center column lock (5) again and screw in the weight hook.
G) Macro function with short center column:
Loosen the center column lock (5) and remove the weight hook (12). Remove
the normal (long) center column (4) and place the tripod legs in the maximum leg
position. Insert the separate short center column (14) from above and close the
WALSER GmbH & Co. KG center column locks (5) again. After this the ball head (1) can be mounted again
as described on part I.
Gewerbering 26
86666 Burgheim H) Monopod function:
Place the tripod legs (8) into a suitable angle. Unscrew the monopod function
Germany
tripod leg (9) (with metal ring and mantona imprint on the foam). Remove the
www.foto-walser.de
weight hook (12) and take out the center column (4). Screw the center column on
www.mantona.de
to the removed tripod leg and install the ball head (1) on the mounting platform for
tripod heads (3). Check the components for a firm and secure fit. The monopod is
now prepared for the installation of your equipment on the ball head. To restore the
tripod function, reassemble the tripod in the reverse order.
Made in China
EN
Fabricado en China TIP: Use the 2. center column segment to reach the maximum working height of
ES
Fabbricato in China
IT the monopod.
I) Installation of the tripod head: Indications for use and maintenance of your tripod and ball head!
Mount the tripod head (1) on the mounting platform (3) by using the 3/8 inch screw. Follow the instructions regarding the maximum load-bearing capacity of your
This ensures the fixed and twist-proof attachment of the tripod head on the moun- tripod model. Please check that the indicated values for placing the equipment
ting plate. Finally, check the fixed seat of the tripod head again. Proceed in reverse centrally on the ball head / tripod are correct. The indicated maximum values are
order to remove the ball head. not valid when the center column is fully extended. If the center column is fully
extended, this usually results in a lower load-bearing capacity and reduced
TIP: For easy attachment and removal of the tripod head, use the lock of the pan-
stability.
orama pan function. To do this, lock the panorama knob (22).
You can increase the stability of your tripod, in particularly tough, windy con-
J) Adjusting the ball head:
ditions by using the safety hook under the center column. You can place a bag or
Loosen the main locking and friction knob of the ball (24) by turning it anti-clockwi-
similar items on this hook to weigh down the tripod.
se. The tripod head can be moved freely. Adjust the desired position / angle on the
In general, all elements for this tripod is maintenance-free. It is, however,
ball head. Screw the main locking and friction knob of the ball (24) tight again. By
recommended to regularly remove any sand, dust or other dirt. If you hear a
partially loosening the lock, the resistance can be increased or reduced.
scratching or grating sound on the tripod legs, wipe off any dirty with a soft, damp
NOTE: When the equipment is screwed on, please hold your device tightly with cloth.
one hand while unscrewing the ball head to avoid any damage to your equipment. Please respect the maximum load-bearing capacity of the individual ball head
models. The maximum load-bearing values given apply for proper use, assuming
K) Quick-Lock system for ball head locking:
that weight is distributed evenly. Depending on the equipment used (and any lever
The ball heads of the mantona DSLM Travel Evolution series have a so-called
action), or if large angles are used – from approx. 45° – the maximum load-bearing
Quick-Lock system. This makes it possible to make a considerably shorter adjust-
capacity may differ from that stated. Dirt or greasy residue on the ball can also lead
ment and means you can lock and unlock the ball head particularly quickly and
to reduced stability.
easily. In this case, it should be noted that a strong and fast unlocking of the main
Under normal conditions of use, this ball head is maintenance-free. Avoid
locking button (24) leads to a sudden dropping of the ball head. If you want to have
dirt, sand and salt water or other impurities entering the ball head and clean the
a noticeable resistance on the ball head, open the main locking and friction knob
ball head if necessary. If, after soiling, a scratching sound is heard, or function is
(24) slowly and stepwise, according to the following overview.
reduced, cleaning it with a soft, damp cloth should help.
0° - ~ 90° stronger resistance/high retaining force
When cleaning the ball head do NOT use any solvents, or cleaning products/
~ 90° - ~180° moderate to light resistance/moderate retaining force
lubricants that contain silicone or oil. This may, in certain conditions, destroy the
~ 180° - 360° release the ball head, no resistance
plastics, seize up the mechanics or reduce the maximum load-bearing capacity.
L) Panorama function: The working conditions of this product are approx. -25° C to +70° C. Avoid high
The ball heads of the mantona DSLM Travel Evolution tripod series have a 360° temperatures or exposure to direct sunlight over extended periods.
panorama scale (23) and thanks to the integrated shock absorber, a smooth pan-
Scope of delivery:
orama movement can be achieved. To make a panoramic movement, loosen the
1x mantona DSLM Travel Evolution tripod, 1x ball head with quick release plate,
panorama locking knob (22). To block the panorama rotation function, tighten the
1x short center column, tools, 1x carrying bag
panorama locking knob (22) again.
M) Removing and inserting the quick release plate:
The Arca-Swiss compatible quick-release plate (16) allows a very comfortable
attachment of your equipment. Open the locking knob for quick release plate base
(26). Remove the quick-release plate by angling it upwards. Proceed in reverse
order to insert the quick-release plate and lock the quick-release plate once more
by screwing the locking knob for quick release plate base (26).
NOTE: Ensure that the quick-release plate is correctly inserted and is not
cross-threaded, and that the clamps of the quick release plate base are sufficiently
tight closed.
N) Installation of the quick release plate on your equipment
The Arca-Swiss compatible quick-release plate (16) of this tripod allows a very
comfortable attachment of your equipment. Normally the quick release plate (16)
will be attached to your equipment (camera etc.) with the 1/4 inch screw (15) and
after this inserted into the ball head. The two safety pins (19) on the plate prevents
a lateral slipping out, when the quick release plate clamp is not completely locked.
The quick release plate can be permanently attached to e.g. your camera.
Additional, compatible quick release plates in many variations can be found in our
webshop at www.foto-walser.de
Technical specifications: Suitable quick release plates available on www.foto-walser.de
Model DSLM Travel Evolution 2252-RA 2241-FA 2552-RA Quick release plate AS-40-1 AS-50-1
Article No. 21438 21439 21440 Quick release plate
Arca-Swiss Arca-Swiss
system
Plate length 40 mm 50 mm
Tripod data
Max. height with head 147 cm 140 cm 173 cm Plate width 38 mm 38 mm
Min. height without head 13 cm 13 cm 15 cm Plate height 10 mm 10 mm
Max. height monopod function with head 151 cm 141 cm 177 cm Plate weight 35 g 37 g
Max. height tripod inserted center Camera screw thread 1x 1/4 Inch 1x 1/4 Inch
115 cm 115 cm 132 cm
column with head
Safety pins, camera screw
Minimum packing size 34,5 cm 40 cm 38,5 cm
Features
with d-ring and coin slot
Max. load capacity tripod 8 kg 6 kg 10 kg
Weight tripod with head 1,33 kg 1,32 kg 1,68 kg
(Digital) DSLR and DSLM Cameras, Camcorders,
Suitable for
Weight tripod without head 1,05 kg 1,04 kg 1,3 kg universal photo equipment with 1/4 inch thread mount
Ø Max. leg segments 22 mm 22 mm 25 mm
Material tripod legs Aluminum Aluminum Aluminum
Typ leg fastening system Ring Lock Flip Lock Ring Lock
Leg segments 5 4 5
Leg segments with foam 3 3 3
No. segments center column 2 1 2
Monopod function, Macrofunction, Center
Features column reversible, 2. short center column incl.,
Weight hook
Spikes upgradeable Yes x Yes
Tripod head
Tripod head type Ball head Ball head Ball head
Max. load capacity head 8 kg 8 kg 10 kg
Weight head with plate 280 g 280 g 380 g
Quick release system Arca Swiss Arca Swiss Arca Swiss
Max. height head 80 mm 80 mm 85 mm
Ø Ball into the ballhead 30 mm 30 mm 36 mm
No of spirit/bubble levels on the head 3 3 3
Mount thread ballhead bottom 3/8 Zoll 3/8 Zoll 3/8 Zoll
Panorama scale Ja Ja Ja
Length x Width plate 40x40 mm 40x40 mm 40x40 mm
Camera connection screw on the plate 1/4 Inch 1/4 Inch 1/4 Inch
Plate with fall protection Yes Yes Yes
Wir sind für Sie da!
Sollten Sie Hilfe oder eine kostenfreie, individuelle Beratung durch unser geschul-
AS-60-1S AS-70-1S
tes Fachpersonal benötigen, dann freuen wir uns, wenn Sie mit unserem Service-
team Kontakt aufnehmen.
Arca-Swiss Arca-Swiss
Wir helfen Ihnen gerne!
60 mm 70 mm
Ihr WALSER Support Team
38 mm 38 mm
10 mm 10 mm If you need help or a free individual consultation by our trained staff, we would be
pleased if you would contact our service team.
40 g 48 g
We will be pleased to help you!
1x 1/4 Inch 1x 1/4 Inch
Your WALSER Support Team
Scale, safety pins, camera
screw with d-ring and
E-Mail / Homepage
coin slot
info@foto-walser.de
www.mantona.de
www.foto-walser.de
Unsere Postanschrift Our postal address:
/
WALSER GmbH & Co. KG
Gewerbering 26
86666 Burgheim
Deutschland
Unser Garantieversprechen
WALSER ist bekannt für seine hochwertige Verarbeitung, beste Funktionalität und einen kun-
dennahen Service. Um unserem außergewöhnlichen Serviceniveau zusätzlichen Ausdruck zu
verleihen, geben wir für dieses mantona Produkt eine Garantie von 2 Jahren. Diese Garantie ist
nur in Verbindung mit Ihrem Kaufbeleg gültig.
Wenn Sie unsere Garantie in Anspruch nehmen wollen, kontaktieren Sie uns bitte per Mail unter
support@foto-walser.de.
Unser umfassendes Garantieversprechen und den Garantieumfang finden Sie unter
www.foto-walser.de/garantie
Niclas Walser
Inhaber
DSLM Travel Evolution
2241-FA