Getting Started Immediately - Lesswire WI4U Kurzanleitung

Please ensure that all of the connection cables have been attached to the Wi4U LTE
router in accordance with the above diagram before mounting the router.
The Wi4U LTE router has been preconfigured to only operate when the ignition is switched
on. The required start-up time is approx. 30 seconds.

Getting started immediately

1. Insert a SIM card into the SIM card slot
as shown in the diagram on the right.
2. Switch on the ignition.
The Wi4U will start (Power LED and
WLAN LED light up).
3. Establish a connection to the Wi4U via WLAN.
The Wi4U has been preconfigured with the following settings:
SSID
WPA (TKIP) / WPA2 (AES)
The device-specific settings can be found on the back of this manual and on the under-
side of the device. Use the standard WLAN application on your computer to connect to
the router. Search for networks and click on Connect to the SSID for the Wi4U. Enter
the WPA2 key.
28
(Network name)
(WLAN key)