Device Functions - Navitel R200 Bedienungsanleitung

19 | USER MANUAL

Device functions

Video
EN
Photo
Playback
Lock file
Loop recording
G-sensor
Parking monitor
Stamp
Connect the device to an external power supply and it will start recording automatically. Press the
button to stop recording. Press OK again to record another video. Each video will be saved automatically.
In Video Record mode, press
photo (it will be saved automatically).
In Video Record mode, press
select a file; press the
In Playback mode, select a file, press
files cannot be deleted or overwritten. Select Unlock Current / Unlock All to remove protection.
This setting allows saving the recording in separate files every few minutes. For example, if set to 5
minutes, 1 hour of footage will be saved as 12 five minute fragments. If the memory card is full, all
unprotected files will be overwritten in the order they were created.
If the vehicle is hit by something, the DVR will automatically lock the current video.
In shutdown state, if vibration is detected, the device will turn on automatically and start recording. The
file will be protected (locked). If nothing happens for over a minute, the device will shut down.
This function adds date stamp to the record.
button to enter Capture mode, press the
button twice to enter Playback mode; press
button to play a file. During playback, press OK to pause/unpause.
and select Protect, then Lock Current or Lock All. Protected-
button to take a
buttons to