Inter Link SAS VITO Montageanleitung Seite 3

ENGLISH
1
.1.) Before starting, please read our assembling instructions carefully and make yourself familiar with
them.
2.) Follow our assembllng instructions carefully.
3.) Compare the Usted parts and fitting list to the contents of the cardboard.
4.) Prepare the necessary tools for assembling and make sure that the tools are in proper condition.
Bad tools lead in some way to dlfficulties during the assembUng.
5.) To malce sure that the fumiture wJ1l n ot be damaged
adequate area and coyer the floor with the cardboards or another soft pad (i.e. c10th or carpet).
6.) We recommend operating always with two or more people.
7.) Do not overwind screws. Check the screws from time to time and if necessary retight them.
8.) Keep the instruction and service sheets. Perhaps you will need them later on.
For wooden fumiture consisting of glass and steel or MDF and coated surface:
Wooden Fumifure: Stains can be taken off with a soft, moistened cloth or by using a special polish
(avaUable in supermarlcet and specialized stores). But do not forget ta wipe the surface with a dry
and soft c10th afterwards.
Steel fumiture:
The metal has a vamished surface. The material could show little discrepancles in colour, c10uds or
stains due to the machine made production which should not be a reason for a complaint.
If some metal parts have been twisted out of shape during transport, vou could carefully tryto twist
them into the original position. Please do not overwind the screws and retight them from time to time.
MOF and coated surfaces:
MOF consists of wooden fibres. Do not worlc on the coated surfaces with Icnivesor sharp objects, as
this could cause damage the material.
Thot should nof be a reoson for comploinfs afterwords.
Due to machine made production, the MDF parts can have sharp edges. You could chamfer them
with a fine standard sand paper. Please do it carefully in order to make sure that Vou will not remove
too much of the material.
Carrying out the assembly is for adults only. Please, Iceep your children away during assembling.
Children might toke smoll ports or fittings away or swallow them up. During assembling it could also
happen that ports of your fumiture fall down on your chlldren.
Pleose, therefore, protect them and moke sure that vou carry out the assembllng ln thelr absence.
If your piece of fumiture consists of glass, if should be handled corefully during assembling. Glass con
break ot any time and cause injuries. Therefore, vou should protect your eyes and hands by wearing
special clothlng and safety shoes, avoilable in the supermarkets and speciaUzed stores.
We are not rlQble for any material damage or injuries resultlng from faulty ossembling.
We are also oot IJabie for any damage resultant from lack of maintenance
(i.e. retighfening of screws. and etc •••). We are not liable for any damage coused by foulty use or
use ogolnst ifs purpose.
We wish Vou a lot of joy and pleasure with your new piace of fumiture.
Your Guorrty Assurance Team by Inter Unk SAS
Important auembRna luaaestions:
or grated during assembling, prepare an
Maintenance advice:
Wamlng:
3
during use.