Directions For Use; Maintenance; Ordering Replacement Parts - Einhell Global NTS 2000 Bedienungsanleitung

Anleitung NTS 2000 SPK 1
Wear safety goggles
Wear ear-muffs

Directions for use

The wet-and-dry grinder is equipped with a dry
grinding wheel and a wet grinding wheel. Please
note that you should always use the dry grinding
wheel for rough grinding jobs. Precision grinding, on
the other hand, should be performed with the wet
grinding wheel, applying the workpiece to the wheel
with only slight pressure. The wet-and-dry grinder
was developed for the grinding and sharpening of
knives, scissors, chisels and tools with cutting edges.
Fitting the glass guard
Fit the glass guards to the two hood guards as
shown in the picture.

Maintenance

Important! Pull out the power plug first.
Remove dust and dirt regularly from the
machine. Cleaning is best carried out with a fine
brush or a cloth.
Never use caustic agents to clean plastic parts.

Ordering replacement parts

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
11.05.2005 12:45 Uhr Seite 9
GB
9