Transportation And Changing Of Installation Position; Repositioning The Door; Before Calling Your After Sales Service - Nordmende RUF147WHA+ Bedienungsanleitung

PART- 5.

Transportation and Changing of Installation Position

• The original packages and foamed polystyrene (PS) can be concealed if required.
• In transportation the appliance should be tied with a wide stripe or a strong rope. The
rules written on the corrugated box must be applied while transporting.
• Before transporting or changing old
installation position, all the moving objects
(ie,shelves,crisper...) should be taken out
or fixed with bands in order to prevent the
shake.

Repositioning the door

• It is not possible to change the opening direction of your freezer door, if the door
handles on your freezer are installed from the front surface of the door.
• It is possible to change the opening direction of the door on models without any
handles.
• If the door opening direction of your freezer may be changed, you should contact the
nearest Authorised Service to have the opening direction changed.
PART- 6.

BEFORE CALLING YOUR AFTER SALES SERVICE

If your appliance is not working properly, it may be a minor problem, therefore check the
following, before calling an electrician to save time and money.
What to do if your appliance does not operate;
Check that;
• There is no power,
• The general switch in your home is disconnected ,
• The thermostat setting is on« • »position ,
• The socket is not sufficient. To check this, plug in another appliance that you know
which is working into the same socket.
What to do if your appliance performs poorly;
Check that;
• You have not overloaded the appliance ,
• The freezer thermostat settings is "1" position(if so set the thermostat dial suitable
value)
• The door is closed perfectly ,
TRANSPORTATION AND CHANGING OF
INSTALLATION POSITION
EN - 10 -