Phottix Indra500 TTL Benutzerhandbuch Seite 11

6. Press the corresponding function button to
"Adjust/Set knob"to turn the sound on/off.
For RX OFF
Functions in Multi mode
1. Press the corresponding function button to
"Adjust/Set knob" to adjust the flash power from 1/4 to 1/128 - 6 stops.
2. Press the corresponding function button to
"Adjust/Set knob" to adjust the Modeling Light mode (OFF/01-09).
3. Press the corresponding function button to
"Adjust/Set knob"to adjust the LCD color screen setting (Classic, Dynamic, Ele-
gant).
4. Press the corresponding function button to
the flash count from 1-100 times (based on the flash frequency and flash out-
put).
5. Press the corresponding function button to
"Adjust/Set knob"to adjust the flash frequency from 1-100Hz.
6. Press the corresponding function button to
the "Adjust/Set knob"to adjust the LCD Display Sensor Setting (Regular, Up-
side-down and Auto by sensor).
7. Press the corresponding function button to
tinuous flash mode option will be highlighted on the LCD screen. Turn the "Ad-
just/Set Knob" to turn the Quick Continuous flash mode on/off.
8. Press the corresponding function button to
"Adjust/Set knob"to turn the sound on/off.
Remarks:
If the "Adjust/Set knob" or the corresponding function button is not pressed
to confirm the selected parameter, the selected parameter will be confirmed
by default within 10 seconds.
11
En
in . Turn the
in . Turn the
in . Turn the
in . Turn the
in to adjust
in . Turn the
in . Turn
in , the Con-
in . Turn the
INSTRUCTION MANUAL