Led Display; Charging The Power Bank; Charge Level - Silvercrest SPB 5.2 A1 Bedienungsanleitung

SilverCrest SPB 5.2 A1

LED display

The Power Bank (A) features a LED display (2) which gives you information on
the charge level of the built-in battery.

Charging the Power Bank

To charge the internal battery of the Power Bank (A), connect the Power Bank
(A) with a free USB port on your computer using the supplied USB charging
cable (B). To do this, plug the Micro-USB connector (5) of the USB charging
cable (B) into the Micro-USB socket (4) of the Power Bank (A), and plug the
USB connector (6) into the free USB port on your computer (which should be
turned on). During the charging process, the four LEDs of the LED display (2)
give information about the current charge level of the Power Bank (A).
LED display
All LEDs flash in succession
One LED on, three LEDs flash in succession
Two LEDs on, two LEDs flash in succession
Three LEDs on, one LED flashes
All LEDs on
12 - English

Charge level

0–25%
25–50%
50–75%
75–100%
100%