Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Features
Top Panel
25
26
26
29
29
9
11
32
33
31
30
30
1. Input Select: Turn these knobs to select the desired audio source for each channel:
•
Digital: the digital ins
•
Line: the line inputs
•
Phono: the phono inputs
•
USB: a computer connected to a USB port. Use the USB 1/2 switch to select USB
Port 1 or USB Port 2. When set to USB Port 1 (and with a computer connected to
that port), the channel will control the corresponding channel in your software.
•
DVS: a computer connected to a USB port while using control vinyl with a digital
vinyl system
2. USB 1/2: When the Input Select knob is set to USB, use these switches to select USB
Port 1 or USB Port 2 as the source. When set to USB Port 1 (and with a computer
connected to that port), the channel will control the corresponding channel in your software.
3. Level: Turn these knobs to adjust the level of the pre-fader, pre-EQ audio signal for each
channel.
4. EQ (High, Mid, Low): Turn these knobs to boost or cut the high, mid-range, and low
frequencies for each channel. You can use the Utility menu to set the type of EQ, which
determines the minimum (cut) and maximum (boost) values (see
2
2
2
1
1
1
3
3
27
4
4
5
5
5
28
4
4
4
4
8
8
8
10
10
10
7
7
7
12
12
12
6
6
13
13
13
14
15
23
2
22
1
46 47 48
3
3
24
4
4
5
21
21
4
4
4
4
8
20
10
19
7
18
12
17
45
6
6
16
13
15
49
34
40
39
41
38
42
43
44
37
36
35
Operation > Utility
Menu).
5
Werbung
