Sage the Nutri Juicer Plus BJE520 Kurzanleitung Seite 8

7. Place the pulp container into position by tilting
the base of the pulp container away from
the motor base and slide the top of the pulp
container over the bottom of the juice cover.
Tilt the base of the pulp container back into
the motor base ensuring it is supported by the
container support extending from under the
motor base.
To minimise cleaning, line the pulp container with
a plastic freezer bag to collect the pulp. Pulp can
then be used in other dishes, or as compost for the
garden or discarded.
8. Place the juice jug provided under the spout
on the right-hand side of the juicer. The juice
jug lid can be used to avoid any splatter.
Alternatively you can fit the custom-designed
juice nozzle over the juice spout and place a
glass underneath. The juice nozzle will prevent
splatter, ensuring mess free juicing.
8
FOR USE WITH FROOJIE
EXTRACTOR
1. Place the filter bowl surround on the top of the
motor base.
2. Place the Froojie Disc into the filter bowl
®
surround and onto the motor drive coupling.
Push down until it clicks into place. Ensure the
Froojie Disc is fitted securely inside the filter
®
bowl surround and onto the motor base.
Never use Froojie Disc without Froojie
®
They must always be used together.
3. Place the Froojie Insert into the filter bowl
®
surround, making sure the warning label on the
handle is facing upwards.
To assemble remaining parts follow steps 4–7
listed on previous page.
NOTE
There is no need to use pulp container when using
Froojie extractor.
®
®
Insert.
®