salvus PS300 Bedienungsanleitung Seite 20

User manual electronic lock Salvus PS300
1. General
1.1 Code entry
The electronic lock works with a 6 to 8 digit code. You can programme a second opening code. Each input is
confirmed by a beep and the green light illuminates. After entering a valid code, you hear two short signals and
the green light flashes twice. If the code is invalid, you will hear a long signal and the red light will flash.
1.2 Opening the safe
Enter the code (ON - factory code 123456 - ENTER) and unlock the door within five seconds using the handle.
If you do not open the lock within five seconds, the lock closes again automatically.
1.3 Closing and locking safe door
Close the door and turn handle fully to closing position. The lock is secured. Check by trying to turn the handle
back.
1.4 Blocking
If incorrect codes are entered three times in a row, the keypad blocks automatically for five minutes. The red
light flashes every few seconds during that period. Entering a wrong code twice after the blocking period ends
will start a new delay time of five minutes.
1.5 Safety reference
All codes have to be securely stored. Do not use personal data, such as birthdays and telephone numbers as
your personal code. Change the factory code before you start using the safe!
20
12
Symbols
Green light is on
Sound signal
Red light is on
Meaning