Measuring Correct / Not Correct; Number Of Stored Measuring; Maximum Stored Measuring - SCHNIER 810276 Betriebsanleitung

SCHNIER
Der Partner für Elektrostatik

Measuring correct / not correct

Measuring was successful - no error of measuring was discovered.
Shifting zero point, e.g., influence by corona charging. The result is only
partially valid.
Measuring range exceeded (indication according to polarity).
The actual value is higher than the indicated one.

Number of stored measuring

Maximum stored measuring

Indication of maximum stored measuring, when timer is activated
alternating with indication of seconds.
Seite 18 von 28
According to measuring correctness four
different
possible errors which are explained below.
Number of stored measuring:
m: 003 = 3 values stored.
Stand 20.01.2008
symbols will
Betriebsanleitung 810276-BAL-DE/EN-090120
appear showing