Rane SEVENTY-TWO Benutzerhandbuch Seite 10

Main Menu
To access the main menu, press Shift and View/Menu, or press and hold View/Menu for 4
seconds. The Main Menu contains the following options.
Mixer Settings: Select this option to edit the following settings.
•
Audio Out: Select this option to edit the Main Out, Mic 1 Clean Feed, and Deck Balance
settings.
Note: When Clean Feed is On, the Mic 1 will not pass audio when recording in Serato DJ Pro.
•
Deck Inputs: Select this option to edit the Phono 1/2 Sensitivity and Tone XOver 1/2 settings.
Note: Set Phono Sensitivity to the settings recommended by your cartridge's manufacturer.
•
Filter Setup: Select this option to edit the Deck 1/2 Resonance and Sampler Resonance
settings.
•
Pad Setup: Select this option to edit the Pad Sensitivity settings.
•
Headphone Setup: Select this option to edit the headphone Tone setting.
Flex FX: Select this option to view and edit the internal Flex FX
settings.
•
To add or remove an effect from the list of favorites,
tap the circle on the right side of the display. When the
circle is green, the effect will be included in the list of Flex
FX in Effects View. When the circle is empty and effect
name is grayed out, the effect will no longer appear in the
list.
•
To adjust the default settings of the internal Flex FX,
tap the wrench icon. Any changes made will be saved to the
mixer.
Cut-In Adjust: Select this option to enter the Cut-In Adjust
setup menu. This controls the amount of dead space between
a fader's closed and open positions. Select the fader you
would like to adjust, then move the selected fader to the
desired position and press Set to store the setting.
Footswitch: Select this option to set the assignments for
Footswitch 1/2/3.
Display: Select this option to adjust the Brightness of the display.
10