lmp WKP - 1314 Benutzerhandbuch Seite 6

FAQ
1. The LMP Keypad shows an erratic behavior such as a sudden loss of connection,
sleep mode after a short time (i.e. only a few seconds), no connection possible when
trying to pair, etc.
Erratic behavior of the LMP Keypad can be a result of (too) low battery power. You should
change the batteries now.
2. Short cuts with the cmd-key (i.e. "cmd+" (to enlarge) or "cmd-" (to downsize) in
Pages) do not work when using the Apple™ wireless keyboard together with the
LMP Keypad.
Keyboard and LMP Keypad are recognized by the Mac OS as two separate input devices.
This means that a combination of the two input devices to form a single command is not
possible. Instead, you can use the programmable hot-keys F13 to F17:
Choose "System Preferences" -> "Keyboard" -> "Keyboard Shortcuts". Press "+" to
assign a new keyboard shortcut.
Enter the shortcut command and assign a hot key (i.e. "Show All Bookmarks" to
F14)
Make sure you are using the correct term and the exact same spelling as in the
program so the system activates the command correctly (i.e. "Show All Bookmarks"
vs. "Show all bookmarks" which will not work!).
Use the hot-key for the assigned task.
3. The "clear" key under Windows™ has different and sometimes strange functions
such as delete forward, delete backwards, no function at all, numlock function, clear
all, etc.
LMP Keypad Manual 1.0
The LMP Keypad is designed to work with Mac OS X. However, it can be used with certain
Windows™ OS and programs as well but without support from the manufacturer.
The "clear" key under Windows™ OS is basically equal to numlock. However, it can have
different functions depending on the software being used. This shortcoming cannot be
changed. Use "delete" and "delete forward" instead to clear any characters and try to
avoid using the "clear" key while working with Windows™ OS.
4. The LMP Keypad does not work anymore with Windows™ OS
You may have accidentally pressed the "clear" key which locks the LMP Keypad (numlock
function in some programs). Unlock the LMP Keypad by pressing "clear" again.
5. Can the LMP Keypad be connected with various Macintosh™ computers, i.e. an iMac
and a MacBook, and switch back and forth?
No, the LMP Keypad can only be connected with one Macintosh™ computer at a time.
When switching to another Macintosh™, the pairing needs to be redone.
It is recommended to delete the "Bluetooth Keypad" first before re-pairing is performed.
You can delete it by choosing the "Bluetooth Keypad" and clicking on the "-" sign in the
left window. Follow the steps under "Bluetooth Pairing under Mac OS X".
6. Can the battery power status be read in the Apple™ System Preferences like with
the Apple™ wireless keyboard?
No, there is no reading for the current battery power status. Once the battery power is
low, the LMP Keypad will display an erratic behavior like loosing the connection all the
time, having difficulty to do the pairing, etc.
7. When using the LMP Keypad with my iPad it does not work properly.