Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Make sure the batteries are placed according to the polarity symbols (+/-)
shown in the battery compartment!
3.
Press the power button on the LMP Keypad briefly (tip
it only!) to turn on the LMP Keypad. The LED indicator
will be flashing in orange a few itmes. The LMP Keypad
is now turned on.
Pairing the LMP Keypad in Mac OS X
Make sure that you have Bluetooth support on your Macintosh™ and Mac OS
X 10.5.x or higher installed. The LMP Keypad may work with older Mac OS X
but it is not officially supported.
1.
Choose the Apple menu and open the "System Preferences. " Under "Internet & wireless
communication" (OS X 10.6.x)/"Hardware" (OS X 10.5.x) you should see a Bluetooth icon. If
you do not, your Mac does not have Bluetooth.
2.
Enable Bluetooth. Under "System Preferences" click the Bluetooth icon and make sure you
see "Bluetooth: On" under the "Settings" tab. If it's not turned on, click "Turn Bluetooth
LMP Keypad Manual 1.0
LMP Keypad power button
On. "
3.
Go to the menu bar and click the Bluetooth icon, then click "Bluetooth Preferences. "
4.
Click the "+" tab (set up new device) in the left window to pair a new Bluetooth device.
The Bluetooth assistant opens. (With Mac OS X 10.5.x, the Bluetooth assistant may ask
what kind of device you are going to pair. Choose "keyboard" and click "continue"). Your
computer now searches automatically for new Bluetooth devices.
5.
Press the Pairing Button on the backside of the LMP Keypad with a pen to set up a
connection to your Macintosh™. The pairing LED starts to flash in yellow. Your
Macintosh™ should see the LMP Keypad as "Bluetooth Keypad". Click "continue".
6.
In the dialog box the device "Bluetooth Keypad" will appear. If it is not listed, make sure
that LMP Keypad is turned on and in pairing mode. Then click "Search Again" in the
"Bluetooth Device" dialog box.
7.
Click on "Bluetooth Keypad" and press "continue". The PIN number of the LMP Keypad
will be shown on your screen.
8.
Enter the 8-digit PIN number with your LMP Keypad according to the digits shown on
your screen and press the "enter" key of your LMP Keypad. Click "OK" and the LMP
Keypad should be listed in the "Devices" tab under "Bluetooth Preferences. "
When you enter a digit on the LMP Keypad, it is not highlighted as with some
other Bluetooth devices. Keep entering the digits quickly and press the
"enter" key at the end. If you need too long to or enter a wrong digit, you may
have to enter the PIN number again.
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
