Ideen Welt BS035-A Bedienungsanleitung Seite 9

The main switch has 3 positions. To start the device set the button into position
"AUTO".
1. AUTO (automatic start): the shredding operation will start automatically once
the document to be shredded is inserted in the feed slot.
shredder is set to normal operation. Please only insert the paper EVENLY into
the feed slot otherwise a paper jam may result. After the paper has been fed
into the shredding slot, the document shredder will deactivate automatically. If
the unit does not deactivate, check whether the waste basket is full or whether
leftover paper is located in the shredder.
If the document shredder is operating and you remove the waste basket in
order to empty it, the unit will immediately stop the shredding process.
Only insert paper into the designated feed slots!
2. REVERSE<< (reverse operation): The button make the cutting unit turn
backward. With these function paper jams can be removed (please refer to
chapter "Protection against paper jams and overloading").
3. OFF position is recommended when emptying the wastebasket or when the
shredder is not in use for a prolonged period of time.
Capacity of the document shredder:
The BS035-A shreds up to 6 sheets of paper (DIN A4, 80g). The paper width may
comprise up to 21.8 cm. When shredding small paper sizes such as letters or credit
card receipts, please insert them into the middle of the shredding slot.
Please ensure that never more than the above-mentioned maximum quantity is
inserted in the shredder. Otherwise the device may sustain damage.
Protection against paper jams and overloading:
The BS035-A is equipped with a motor overload guard. To protect the machine well,
we suggest the user to operate it in this way: work 2 minutes then rest 60 minutes.
Under the following conditions, the current feed to the unit's motor is interrupted:
1. Continual operation of the document shredder with maximum capacity for a
prolonged period of time, e.g. longer than 2 minutes without interruption.
2. Overrunning the shredding capacity e.g. adding more than 6 sheets of paper
(80g) in one operation or in the event the paper is not inserted length-wise into
the feed slot.
Under the above-mentioned conditions, the automatic overload guard of the motor is
triggered, whereupon the current feed to the device is interrupted. In such a case,
please take the following steps:
1. Disconnect the main plug from the AC socket in order to avoid the risk of serious
injuries and wait at least 60 minutes until the overload guard has reset. Now tear
off excess paper from the top of the shredder or remove it.
2. Reconnect the main plug to the AC socket and press the REVERSE button. Pull
the remaining paper away from the shredding blades. If necessary, repeat this
step.
3. With pressing the FORWARD button and the open feed slot, you may now
continue the normal shredding process.
- 9 -
The document