Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
When transporting, setting up, maintaining and repairing the InductWarm
following regulations and guidelines that are applicable in your country must be observed:
Regulations of professional electricians' associations, e.g. VDE, SEV, etc.
•
EC directives (in EU countries)
•
Accident prevention regulations
•
Guidelines of employers' liability insurance associations
•
Trade regulations
•
If the InductWarm
•
furniture, decorative paneling, etc., it is recommended that these objects consist of non-combustible
material; otherwise they must be covered with a suitable non-combustible, heat-insulating material and
the fire safety regulations are to be observed extremely carefully.
Intended use
If the glass ceramic shell is broken or even slightly cracked, then the InductWarm
•
switched off and disconnected from the electrical supply. Do not touch any parts inside the device.
The surface of the InductWarm
•
Only use suitable pans with a minimum base diameter of 12 cm for induction warming. Theoretically, it
•
is possible to use smaller dishes, but this may result in the following:
o Reduced efficiency
o Pan recognition may not be possible
o Radiation may be greater
Never heat a pan while empty. This could cause the pan to overheat.
•
Once you have removed the pan after warming, remember to switch the InductWarm
•
unless you intend to use it again straight away. This will prevent the device from heating up accidentally
should you or someone else place a pan on the warming surface.
Do not heat up tins or other sealed containers, as these can explode! Items that are unsuitable for use
•
include any dishes that are not specifically intended for induction devices, as well as metal splash
guards, aluminum foil, cutlery, jewelry, watches, metallic objects, etc.
The induction hob is officially switched on as soon as the rotary switch is moved away from the off
•
position (red line aligned with status indicator). Whenever the hob is not in use, the device must be
switched off.
Symbol explanation:
•
200 device is being installed in close proximity to a wall, partition walls, kitchen
®
®
200 device should not be used for storage.
This exclamation mark shows warnings.
This radiation warns of non-ionizing electromagnetic radiation.
®
200 device, the latest version of the
®
200 device must be
®
200 device off,
Werbung
Inhaltsverzeichnis
Fehlerbehebung
