Scope Of Delivery; Instructions For Use - Ottobock 4R181 Harmony P4 HD Gebrauchsanweisung

CAUTION
Unallowable combination of prosthetic components
Risk of injury due to breakage or deformation of the product
► Only combine the product with prosthetic components that are approved for that purpose.
► Based on the instructions for use of the prosthetic components, verify that they may be com­
bined with each other.
CAUTION
Use under unallowable environmental conditions
Risk of injury due to damage to the product
Do not expose the product to unallowable environmental conditions.
►
► If the product has been exposed to unallowable environmental conditions, check it for dam­
age.
► If damage is apparent or in case of doubt, do not continue using the product.
► Take suitable measures if required (e.g. cleaning, repair, replacement, inspection by the
manufacturer or a specialist workshop etc.).
CAUTION
Exceeding the service life and reuse on another patient
Risk of injury due to loss of functionality as well as damage to the product
Ensure that the approved service life is not exceeded.
►
► Only use the product on a single patient.
CAUTION
Mechanical damage to the product
Risk of injury due to change in or loss of functionality
► Use caution when working with the product.
► If the product is damaged, check it for proper function and readiness for use.
► In case of changes in or loss of functionality, do not continue using the product (see "Signs
of changes in or loss of functionality during use" in this section).
Take any necessary measures (e.g. repair, replacement, inspection by the manufacturer's
►
customer service, etc.).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by reduced prosthetic suspension.

4 Scope of delivery

Fig. 1, item
–
1
2
3
4
5
6
7
16
Quantity Designation
1

Instructions for use

1 Harmony P4* with threaded ring and
lamination disc
1 Lamination dummy
1 Pin wrench for Harmony P4*
1 Vice jaws for Harmony P4*
1 Allen key 2 mm
1 Rubber connector cap
1 Vacuum connector
Reference number
–
–
–
4X901
–
–
–
2R117-0