Yamaha RC-D24 Bedienungsanleitung Seite 8

5
Touring the RC-D24
N
REC button
This button is used in conjunction with the [PLAY] button to start recording. The REC
button indicator lights up while recording.
Other Buttons
O
ABS button & indicator
This button is used to set the counter mode to either Absolute (ABS), the default set-
ting, or Relative (REL). The ABS indicator lights up when Absolute (ABS) is selected.
P
CAPTURE/UNIT SELECT button
This button has two functions: Capture and Unit Select. Pressed on its own, it's used to
capture time positions while the D24 is stopped or during rewind, fast forward, play-
back, recording, or rehearsal. Captured values can be located or stored in locate mem-
ories. Pressed in conjunction with the [SET] button, it's used to access the Unit Select
function, which is used to select individual D24s in multiple-unit systems. See "Select-
ing D24s in Multiple-Unit Systems" on page 8 for more information.
Keypad
A
Keypad buttons
The keypad is used with various functions to enter time values, parameter values,
project numbers, locate memory numbers, select tracks for recording, select individual
D24s in multiple-unit systems, and so on.
RC-D24—Owner's Manual
O
P
7
4
1
1
0
CANCEL
ABS
CAPTURE
UNIT SELECT
PROJECT
8 9
SELECT
LOC MEM
5 6
RECALL
LOC MEM
2 3
STORE
ENTER LOCATE
6 7
2
3
4
5