Ph-Measurement; Reset; Exit - IKA ETS-D6 Betriebsanleitung

• pH-Measurement

The pH measuring function can be activated using the "pH-measure-
ment" menu item.
¢ LCD display see fig. 18
Accept and store:
Press button SET
• Reset (Restoring parameter to factory settings)
Switch off the device
Press and hold down the buttons L and M, and switch on the
equipment
or use the "Reset" menu item
¢ LCD display see fig. 19
Accept and store:
Press button SET

• Exit

Select the menu item "Exit" to leave the Setup menu.
¢ LCD display see fig. 9
Any changes made can be accepted or rejected.
012007
21