Werbung
Verfügbare Sprachen
Verfügbare Sprachen
f If it is not possible to avoid using the electrical tool in a damp environ-
ment, use a residual current circuit-breaker.
The use of a residual current circuit-breaker reduces the risk of an electrical
shock.
3 Personal safety
a Stay alert, watch what you are doing and use common sense when op-
erating a power tool. Do not use a power tool while you are tired or un-
der the influence of drugs, alcohol or medication.
A moment of inattention while operating power tools may result in serious per-
sonal injury.
b Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust masks, nonskid safety shoes, hard hat, or
hearing protection used for appropriate conditions will reduce personal injuries.
c Prevent unintentional starting. Ensure the switch is in the offposition
before connecting to power source and/or battery pack, picking up or
carrying the tool.
Carrying power tools with your finger on the switch or energising power tools
that have the switch on invites accidents.
d Remove any adjusting key or wrench before turning the power tool on.
A wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
e Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
f Dress properly. Do not wear loose clothing or jewelry. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
g Keep handles dry, clean and free from oil and grease.
Slippery handles do not allow for safe handling and control of the tool in unex-
pected situations.
h If devices are provided for the connection of dust extraction and col-
lection facilities, ensure these are connected and properly used.
Use of these devices can reduce dust related hazards.
4 Power tool use and care
29
Werbung
