Components; Before First Use; Use - Ideen Welt MMF-234-V2 Bedienungsanleitung

COMPONENTS

1 2 3
1. Cover
2. Attachment for heating milk
3. Silicone ring
4. Attachment for frothing milk
5. Milk container
6. Markings: MAX
7. Handle
8. Power cord with plug
9. Base
10. Cold button
11. Hot button
12. Rotating pin (not shown)

BEFORE FIRST USE

1. Remove all packaging materials and check the product and accessories for damage.
2. Clean the milk foamer as described in Cleaning and Maintenance. Heed all Safety
Information while doing so.

USE

You may use the milk foamer to prepare hot and cold milk, or to heat milk to 65°C.
You can cancel a selected function at any time by pressing the corresponding button (10, 11)
once again or by lifting the milk container (5) from the base (9).
Milk foam
1. Lift the milk container (5) from the base (9) and remove the cover (1).
2. Install the attachment for frothing milk (4) all the way on the rotating pin (12) inside the milk
container (5).
3. Fill the milk container (5) with up to 125ml of cold milk. Caution! Do not exceed or fall below the
MIN / MAX
4. Close the cover (1).
5. Connect the power plug (8) to a suitable power socket.
6. Put the milk container on the base (9).
P170011_R4G_MMF-234-V2_MilkFrother_6L_20170504.indd 12
4
12
11
10
9
(heating) and MAX / MIN
with operating indicator (blue)
with operating indicator (red)
markings inside the milk container.
5 6 7
(frothing)
12
8
t
4/5/2017 2:46 PM