Pioneer F-F6MK2-K Bedienungsanleitung Seite 12

03 Controls and displays
1
2
3
4
5
6
TUNER 
1
Switches the unit between standby and on.
2 Preset channel range buttons
(A/B/C, D/E/F, G/H, I/J)
Use to tune in preset broadcast stations.
3 Station call buttons (1 to 10)
Use these buttons to preset stations, and to
recall previously preset stations.
4 AMP controls
Use to control Pioneer amplifier.
AMP 
VOLUME
MUTE
12
En
TUNER DIMMER
7
A/B/C D/E/F MPX
8
G/H I / J DISPLAY
9
1 2 3
4 5 6
7 8 9
10
VOLUME
AMP MUTE
A.PRESET
MENU A.TUNE
10
BAND TUNE MEMORY
11
PRESET ENTER PRESET
12
TUNE
TUNER
5 MENU
Use to enter/exit menu mode.
6 BAND
Selects DAB, FM or AM.
7 DIMMER
Dims or brightens the display (or switches the
backlight off).
8 MPX
Use to switch between stereo and mono
reception during FM broadcasts. If the signal is
weak, switching to mono may improve the
sound quality (page 15).
9 DISPLAY
Use to select the display mode (page 18, 24).
10 A.PRESET/A.TUNE
When pressed during FM or AM mode,
receivable stations are automatically stored in
the preset memory in order starting from
preset channel A1.
Hold the button depressed for two seconds or
longer during DAB mode to perform full scan
operation (Full band and L-band).
Press the button briefly during DAB mode to
perform a local scan (UK band III) for UK
broadcast services (UK stations are in the
range of 11B to 12D).
11 MEMORY
Use to preset stations. This button is also used
for manual station-name character selection
for FM and AM broadcasts, and for Program
Type search.
12 Tuning buttons
ENTER
Selects an option or executes a command.
TUNE
Use to change reception frequency.
PRESET 
Selects station preset when listening to the
radio.