Stop Heating - Heidolph Safe Originalbetriebsanleitung

Operation
MR Hei-Standard
✓ In addition to heating button, the
control light for heating up will
illuminate.
✓ Control light will be illuminated as long
as set temperature is not reached.
✓ When set temperature is reached the
control light for heating up will go out.
MR Hei-Tec, MR Hei-Connect
✓ The actual temperature is shown in the
display.
✓ An additional heating symbol
be shown in the display as long as set
temperature is not reached.
✓ When set temperature is reached the
heating symbol
Temperature can be adjusted any time when heating is on.
The unit is equipped with a residual heat indicator.
✓ If heating is switched off and temperature is above 50 °C, the
✓ The illumination of the heating button will switch off automatically,
The residual heat indicator does not function when device is switched
OFF via main switch! When switched ON again, residual heat will
function again.

Stop heating

➜ Press heating button.
✓ Illumination of heating button will go out.
✓ Heating is switched off.
A power failure will stop heating and mixing and put device on stand
by. Set temperature and speed will be saved.
will
will disappear.
heating button will blink orange.
when temperature decreases below 50 °C.
Temperature control knob
Control light: heating up
Heating button: Heating on
Actual temperature
Heating button: Heating on
17