Operation - Westfalia 98 16 70 Original Bedienungsanleitung

Intended Use
 The machine is intended for tacking of cardboard, insulating material,
fabric, foils, leather and similar materials on surfaces of wood or materials
similar to wood. The machine is not suitable for the attachment of wall and
ceiling panelling.
 The intended use also includes an operation following the operating
instructions. The operator is liable for any damage caused by improper use.
Before first Use
Remove the unit and the accessory out of the packaging. Keep packaging
materials out of reach of children. There is risk of suffocation!
Inserting Staples
Please keep in mind that staples must be suited to the material they are used
in. The harder the material is, the shorter the staples should be.
Unhook the end of the staple magazine spring assembly from the end of the
handle by pressing it down and disengaging it from the stapler. Pull out the
entire assembly and insert strips of staples of the desired type no longer than
a total of 12 cm into the stapler and reinsert the spring assembly. Hook the
end cap into the slot in the housing.

Operation

Strike the place into which you desire to drive a staple with the hammer end of
the stapler with a sufficient amount of force of press the hammer end of the
stapler down onto the surface with sufficient power. The staple is driven into
the surface with the power of the impact.
Cleaning and Storing

Keep the magazine channel free from debris and foreign objects.

Do not submerge the unit in liquids of any kind and only use a dry cloth to
clean it. At the utmost use a slightly wet cloth.

Store the unit in a dry place that is protected from dust and dirt.
Operation
8