VAPANION TAROT PRO Bedienungsanleitung Seite 56

VAPANION
OPERATING & CHANGING THE VAPING MODES
TAROT PRO
2. Setting the temperature: In the TC-Ni/TC-Ti/TC-SS/TCR modes, the temperature can be adjusted by pressing
the Plus and Minus buttons. You can choose between the ranges 100°C to 315°C and 200°F to 600°F. When
pressing the Plus or Minus button, the temperature is increased or decreased by 5°C or 10°C. Press and hold
the respective button to set the desired temperature at a higher speed.
3. Locking/Unlocking the resistance: In the TC-Ni, TC-Ti, TC-SS, and TCR modes, you can lock or unlock the
resistance by simultaneously holding down the Minus and Mode buttons for two seconds. A lock ( ) will
appear on the display. Replacing the atomizer head does not reset the set resistance.
4. Automatic detection of new atomizer heads: To adjust the temperature when inserting a new atomizer
head, "OLD LOAD: -, NEW LOAD: +" appears on the display. If the atomizer head differs from the previous one,
select the Plus button and the resistance will be newly selected. Select the Minus button to leave the preset
resistance as is.
54