Washing The Dishes - Bosch SGS20A19EU Gebrauchsanweisung

en
Programme selection
The most appropriate programme can be
identified by comparing the type of
crockery, cutlery, etc., as well as the
amount and condition of food remains,
with the details contained in the
programme overview.
Reduce costs!
If only a small number of
dishes have been loaded into
the dishwasher, selecting a
programme that operates at
the next lowest temperature
will usually suffice.
Programme data
The programme data (duration, energy
and water consumption) can be found in
the summary of instructions and refers to
standard conditions. Greater deviations
may be caused by:
different quantities of utensils
inlet temperature of the water
water pressure
ambient temperature
mains voltage tolerances
and appliance-specific tolerances
(e.g. temperature, water flow rate, etc.)
The water consumption values refer
to water hardness value 2.
34

Washing the dishes

Switching on the appliance
Turn on the tap fully.
Check once again that the spray arms
can rotate freely.
Select a programme with the
programme selector
a clockwise direction only).
Switch on the main switch
the appliance has been switched on,
the main switch is slightly recessed in
the control panel.
The programme starts.
Programme sequence indicator
While the dishes are being washed, the
programme selector rotates in a clockwise
direction and indicates how far the
programme has progressed.
End of programme
The programme has ended when the
pump noise is no longer audible and the
programme selector has reached its initial
position (12 o'clock position).
Switching off the appliance
Several minutes after the end of
the programme:
Switch off the main switch
Turn off the tap
Remove the utensils when they have
cooled down.
34
(rotate in
1
. When
4
.
4