Christopeit Sport TM200S Bedienungsanleitung Seite 17

Assembly Instructions
Put everything clearly on the ground and control the comple-
teness based on the assembly steps. Some screws are alrea-
dy at the mounting locations for an easy assignment. Assem-
bly time is approx. 20min.
Step 1:
1. Remove all small parts, loose packing material out of the box
and then take out with help of a second person the preassem-
bled frame of packaging. Don't cut the nylon strap for remo-
ving the base frame from carton.
Step 2:
1. Place the screws (42) and teeth washers (60) on left and right
side of base frame(1).
2 Cut now the nylon strap and fold up with care the supports left
and right side (3L+3R). Take a special view on the right support
(3R), because no squeezing the cable.
3. Screw tightly the supports (3L+3R) at base frame by using
screws (42) and teeth washers (60).
4. Fold up the computer (12) into right position and tighten with
screws (42) and teeth washers (60).
17