HomeMatic HmIP-PSM-IT Bedienungsanleitung Seite 32

Start-up
• Plug in the pluggable switch and meter into the
desired socket (see figure 2).
• Teach-in mode remains activated for 3 minutes.
You can manually start the teach-in mode for an-
other 3 minutes by pressing the system button (A)
shortly (see figure 3).
• Your device will automatically appear in the
Homematic IP app.
• To confirm, please enter the last four digits of the
device number (SGTIN) in your app or scan the
QR code. Therefore, please see the sticker sup-
plied or attached to the device.
• Please wait until teach-in is completed.
• If teaching-in was successful, the LED lights up
green. The device is now ready for use.
• If the LED lights up red, please try again.
• Select the desired solution for your device.
• In the app, give the device a name and allocate
it to a room.
After teaching-in, connected loads can be easily switched
on and off or the energy consumption can be measured.
32