LD Systems MAUI 11 G2 Bedienungsanleitung Seite 7

7
MIC IN
Balanced microphone input with XLR / 6.3 mm jack
combo socket (Mono). It is also possible to use an
unbalanced microphone cable (mono jack).
The microphone input has a built-in low-cut filter (Low-
cut) to suppress low-frequency noise and avoid feedback.
NOTE: There is no phantom power
on the microphone input.
8
MIC LEVEL
Volume controller for the microphone channel. When
turned to the left, the volume is lowered, when turned
to the right, it is increased.
9
LINE IN (RCA R + L)
Unbalanced stereo line input with RCA sockets for
connecting an external audio source (e.g. CD player,
keyboard). Both line inputs N 9 and N 10 can be used
simultaneously; the volume ratio must be set on the
instrument, or on the external player.
10
LINE IN (XLR / 6.3 mm combo jack R + L)
Balanced stereo line input with XLR / 6.3 mm jack
combo sockets for connecting a playback device (e.g.
mixer, keyboard). Both line inputs N 9 and N 10 can
be used simultaneously; the volume ratio must be set
on the instrument, or on the external player.
11
LINE LEVEL
Volume control for the line channel (N 9 and N 10).
When turned to the left, the volume is lowered, when
turned to the right, it is increased.
12
HI-Z INPUT
High-impedance mono input with 6.3 mm jack socket for acoustic or electric guitar. The HI-Z input has a built-in low-cut filter (Low-cut) to
suppress low-frequency noise and avoid feedback.
13
HI-Z LEVEL
Volume control for the HI-Z channel. When turned to the left, the volume is lowered, when turned to the right, it is increased.
14
MP3 INPUT
Stereo line input with 3.5 mm jack socket for an MP3 player or other playback device. Both interfaces MP3 and Bluetooth
simultaneously; the volume ratio must be set on the instrument, or on the external player.
15
BLUETOOTH
®
The mixer of the LDMAUI11G2 array system is equipped with Bluetooth, meaning that audio files from another Bluetooth device (e.g. Smartphone)
can be played back on the LDMAUI11G2 array system (maximum distance between both devices about 10 metres). If no Bluetooth device is
connected to the internal Bluetooth unit, the blue Bluetooth LED does not light up; the LED flashes at a frequency of about 3 Hz during pairing; if the
Bluetooth LED is on permanently, then a Bluetooth connection is established and the track playback can be started. The volume is adjusted using
the Bluetooth volume controller (N 16) or on the source device.
®
7
8
11
13
12
14
16
15
9
10
17
can be used
®
7