Beamz LED PARBAR 4Way Tricolor Gebrauchsanleitung Seite 2

Thank you for purchasing this product, we are sure that it will serve you for many years to come.
To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the
basic operations of this unit. After you have read the instructions, please retain them for future reference.
This unit has been tested at the factory before being shipped to you.
To prevent or reduce the risk of electrical shock or fire, do not expose the unit to rain or moisture. To prevent a fire hazard, do
not expose the unit to any naked flame sources. Unplug this apparatus during lightning storms or if it is unlikely to be used for
long periods of time.
When installing the unit, please ensure you leave enough space around the unit for ventilation. Slots and openings in the unit
are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. To prevent fire hazard,
the openings should never be blocked or covered.
Always handle the power cable by the plug. Never pull out the plug by pulling on the cable. Never touch the power cable when
your hands are wet as this could cause an electric shock. Do not tie a knot in the cable. The power cable should be placed such
that it is not likely to be stepped on. A damaged power cable can cause a fire or give you an electrical shock. Check the power
cord periodically, if you ever find that it is damaged; replace it before using the unit again. Contact your retailer for a
replacement.
The voltage of the available power supply differs according to country or region. Be sure that the power supply voltage of the
area where this unit is to be used meets the required written on the unit.
The lightning flash symbol inside a triangle is intended to alert the user to the presence high voltage within the unit's
enclosure that may be of sufficient power to constitute a risk of electrical shock to persons.
Caution: to prevent the risk of electric shock, do not attempt to open the unit. No user-serviceable parts inside. Refer all
servicing to qualified service personnel.
The exclamation mark inside a triangle is intended to alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the appliance.
Any modification carried out on the unit may invalidate the unit's warranty.
If applicable, only use the stand, tripod or bracket specified or sold with the apparatus.
Select the installation location of your unit carefully. Avoid placing it in direct sunlight or locations subject to vibration and
excessive dust. Do not use the unit where there are extremes in temperature (below 41ºF / 5ºC or exceeding 95ºF / 35ºC).
Unpacking and safety: Please unpack your new product carefully; your new product should reach you in perfect condition.
Please check that no damage has occurred during transit. If any damage is found, do not operate your unit. Please contact the
retailer you purchased it from immediately. If there is any damage to the mains cable do not use the device. Always disconnect
the unit from the mains supply when carrying out any servicing or cleaning of the unit.
Modes:
1. Sound mode – outputs built-in programs from the parbar in time with the music. Activated via the built-in
microphone.
2. Auto color mode – Via Menu Display. Activated and set via the onboard controller.
3. DMX 512 mode – Control each individual LED colour, brightness, strobe, dimmer, color fade and sound control.
4. Master / Slave mode – Set up SLND
UK
Endless show creation possibilities
2