Troubleshooting - TRENDnet TK-803R Anleitung Zur Schnellinstallation

Troubleshooting

Do I need to use the included external AC adapter?
It is recommended that you use the included external AC adapter with the
TK-803R/TK-1603R KVM switch.
I have the KVM switch connected properly, but my USB keyboard and mouse don't work.
1. Make sure your USB port is working properly by testing it with your other USB devices.
2. Once you confirm that the USB port is functional, please reboot your computers, and try to
use the KVM switch again.
3. If your computer is running Windows 98SE, you may need to download and install the
USB hot fix.
Please go to this link for download and installation instructions:
http://support.microsoft.com/kb/q240075. Once the hot fix is installed, follow the installation
instructions in Section 2.
Can I connect or disconnect the KVM cables while the computers are turned on?
Yes, you can connect or disconnect the KVM cables while the computers are turned on,
because the interface is Hot-Pluggable.
Will the KVM switch restore the keyboard settings when switching between computers?
Yes, the KVM switch will restore the keyboard settings when switching between computers.
(i.e.: Caps Lock, Num Lock, etc.)
How do I switch from one computer to another with the KVM switch?
You can switch PCs by pressing the push button on the KVM switch or by using the Hot Key
commands. Go to Section 3 Operation for more information.
How to upgrade new firmware to my KVM switch?
Please go to the TRENDnet website (www.trendnet.com) to check if there is a new firmware
available for your KVM switch and follow the installation procedure to perform the update.
If you still encounter problems or have any questions regarding the TK-803R/TK-1603R please
contact TRENDnet's Technical Support Department.
8