The Helium Escape Valve; The Automatic Movement - Chris Benz DEEP 2000M Automatic Bedienungsanleitung

5. THE HELIUM ESCAPE VALVE

The helium valve allows existing helium atoms to exit. Therefore it prevents the buildup of internal
pressure, which can lead to a losening of the glass of the watch. If the pressure in the watch
exceeds 5bar, the pressure compensation will be done automatically. The helium valve is used for
movements in a pressure chamber or in other areas with pressure overload (tunnel construction).
The helium valve of the CHRIS BENZ DEEP 2000M Automatic is placed on the left side
of the watchcase and other additional steps are not necessary to ensure the functionality.
20

6. THE AUTOMATIC MOVEMENT

(0) (0)
ATTENTION: To ensure proper functioning of your watch, you should
give the watch to an offi cial CHRIS BENZ Dealer every 5-6 years for service.
The battery is omitted by the automatic movement. The
drivemechanism is powered by the natural motion of the
wearer´s arm. Without wearing the watch the power re-
serve will working for up to 36 hours. This may vary how-
ever on how long the watch was worn before taken off.
MANUAL LOADING
Open the crown and leave it in position (0).
You can load the watch manually by
turning the crown.
After loading the watch, screw the
crown to the locked position tightly.
21