Connections With Tv Using Hdmi (Digital) Cable - Samsung HW-J650 Benutzerhandbuch

CONNECTIONS WITH TV USING HDMI (DIGITAL) CABLE

1. Connect an HDMI cable (not supplied) from the HDMI OUT (TV-ARC) jack on the back of the product to the
HDMI IN jack on your TV.
2. Press the (Source) button on the top panel of Soundbar or the SOURCE button on remote control to select
the D.IN mode.
● HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector.
● If the TV provides an ARC port, connect the HDMI cable to the HDMI IN (ARC) port.
● We recommend you use a coreless HDMI cable if possible. If you use a cored HDMI cable, use one whose
diameter is less than 14 mm.
● Anynet+ must be turned on.
● This function is not available if the HDMI cable does not support ARC.
TV SOUNDCONNECT
You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV
SoundConnect function.
1. Turn on the TV and Soundbar.
•
Turn on the menu of the TV.
•
Move to Speaker Settings on "Sound" tab.
•
Set the "Add New Device" menu to "On".
2. Press the (Source) button on the main unit's top panel or the SOURCE button on the remote control to
select the TV mode.
3. On the TV, a message asking whether to enable the TV SoundConnect function appears.
4. Select <Yes> to finish connecting the TV and Soundbar using the TV's remote control.
HW-J650_J651_XU_ENG_0416.indd 17 HW-J650_J651_XU_ENG_0416.indd 17
HDMI Cable
(not supplied)
HDMI IN
LAN 5V 0.5A
Connect
17
HDMI OUT
(TV-ARC)
HDMI OUT
(TV-ARC)
AUX IN OPTICAL IN
HDMI OUT
HDMI IN (TV-ARC)
CONNECTIONS
2015-04-16 2015-04-16 11:15:17 11:15:17