Konig Electronic SEC-DVR408V2 Anleitung Seite 10

1. Push to open HDD compartment.
2. Lift the handle to unlock the HDD compartment.
3. Pull the handle to remove the HDD compartment.
4. Slide the compartment cover to open it.
5. Install the HDD inside the compartment and then push to connect the HDD connector to the
connector inside the compartment.
6. Slide to close the compartment cover.
7. Slide the HDD compartment into the DVR.
8. Press down the handle to lock the HDD compartment in place.
10