Renson Endura Twist Bedienungsanleitung Seite 31

• Exposure to radio waves. The button control contains a radio transmitter and receiver.
Whenever the button control is on, it will sent and receive these radio waves with its
antenna.
• Don't put the button control in the following areas (or in areas where the following
conditions can occur):
∙ Excessively greasy atmosphere
∙ Corrosive or flammable gasses, liquids or vapours
∙ Room temperatures above 40°C or beneath -5°C
∙ Relative humidity above 90%
∙ Places where it can be subject to jets of water. Don't ever put the display under water.
• Take the following safety regulations always into account when installing a button
control.
Failure to follow these regulations can cause damage to the device or can result in a
personal injury, for which RENSON
∙ Make sure the electric source corresponds to a 3V button-cell battery (CR2430)
∙ The installation has to be performed in accordance with the general and local building,
safety and installation requirements.
NV can't be held liable.
®
EN
31