Repeating Tracks On An Audio Cd; Shuffling Tracks On An Audio Cd; Creating A Playlist From A Cd; Ripping - Samsung BD-E6100 Bedienungsanleitung

Repeating Tracks on an Audio CD

You can set the product to repeat tracks on an
audio CD (CD-DA/MP3).
1.
During playback, use the ► button to select
in the lower right corner of the screen,
and then press the v button.
2.
Use the ▲▼ to select the repeat mode you
want - Off, One Song, or All - and then press
the v button.
AllShare Play
/ Music /
TRACK 001
TRACK 002
TRACK 003
TRACK 004
TRACK 005
TRACK 006
TRACK 007
TRACK 008
TRACK 009
TRACK 010

Shuffling Tracks on an Audio CD

You can set the product to play tracks on an audio
CD (CD-DA/MP3) at random.
1.
During playback, use the ► button to select
in the lower right corner of the screen,
and then press the v button.
2. Use the ▲▼ to set the Shuffle mode On or
Off, and then press the v button.

Creating a Playlist from a CD

1.
With the Playback screen displayed, press
the TOOLS button. The Tools menu appears.
2. Use the ▲▼ buttons to select Play
Selection, and then press the v button.
The Play Selection screen appears.
3.
Use the ▲▼ buttons to select a track, and
then press the v button. A check appears
to the left of the track.
4.
Repeat Step 3 to select and check additional
tracks.
02231C-BD-E6100-XN-ENG.indd 39
1/14
Audio CD
02:38
03:17
05:21
05:34
02:54
03:44 TRACK 001

04:07
03:42
00:03 / 02:38
03:15
03:16
bc Page Move / Tools ' Return
5.
To remove a track from the list, move to the
track, and then press the v button again.
The check on the track is removed.
6.
When done, press the ► button to select
Play, and then press the v button. The
Music Playback screen reappears listing only
the tracks you checked. The selected tracks
play automatically.
| NOTE |
\ You can create a playlist with up to 99 tracks on Audio
CDs (CD-DA).
\ If you have created a playlist, Play Selection is replaced
by Edit playlist on the Tools menu.
\ On the Play Selection screen, you can also choose Select
All, Deselect All, and Cancel.
- Use Select All to select all tracks. This cancels your
individual track selections. When you press the
RETURN button on your remote or select 6 button,
and then press the v button, all tracks will appear
on the Music Playback screen, and the product will
begin to play all tracks from Track 001.
- Use Deselect All to deselect all selected tracks at once.
Then, select individual tracks or use Select All to select
all the tracks, and then press the RETURN button
on your remote or select 6 button, and then press
the v button. If you do not use Select All or select
individual tracks, the Playlist will not change.
- Cancel cancels any changes you made on the Play
Select screen. When you return to the Playback screen,
the Playlist will be unchanged.

Ripping

1.
Insert a USB device into the USB jack on the
front of the product.
2.
With the Playback screen displayed, press
the TOOLS button. The Tools menu appears.
3.
Use the ▲▼ buttons to select Rip, and
then press the v button. The Rip screen
appears.
4.
Use the ▲▼ buttons to select a track, and
then press the v button. A check appears
to the left of the track.
5.
Repeat Step 3 to select and check additional
tracks.
39
|
English
2012-04-30 오후 5:58:38